It was brought to my attention that the newly shipped FXPAK Pro carts only come up with a black screen. This is due to the currently released firmware being incompatible with the new hardware. This is simply bad timing and an oversight on my part.
I was crunching to make USB work with the new Rev.D hardware in the past three weeks – at the same time failing to realize that the cartridges don’t ship with cards containing the firmware build I sent to krikzz for burn-in testing earlier. The new hardware, besides using a new microcontroller, also needs slightly adjusted FPGA core files due to differences in clocking so the existing ones are not compatible.
I was going to release the 1.11.0 firmware right about now anyway but I’m trying to tackle a savestates issue first, where it sometimes crashes after saving or loading a state in standalone savestate mode.
QUSB2SNES / SaveState2Snes appears to work fine though.
Here is the current build. I will publish a proper release within the next few days.
Note: This is for Rev.D owners only who have been currently left with a non-operating cartridge. Final release with support for all sd2snes/FXPAK Pro versions will follow up within the next few days.
https://sd2snes.de/files/sd2snes_firmware_v1.11.0b2-RevD.zip
Please let me know if this solves your immediate issues.
Again, I’m sorry for the inconvenience and hassle caused.